Product Information

Sold in sets of 12.  Torque to 20ft lbs MAX.  Max locking pin Torque is 60 INCH lbs.

Our Bolts Don't Back Out!
The Split Lock TM Friction Lock Fastener design uses a locking set pin built in to the bolt, When tightened the set pin expands the bolt threads against the thread wall providing an unmatched lock. The Split Lock TM Friction Lock Fastener is the only fastener that provides a locking system without using any additional wires, locking compounds, lock washers or complicated interrupters.

Easy Installation
Install the Split Lock TM as you would any other standard bolt, the only additional step needed is to simply use a high quality hex key allen wrench to tighten the set pin to lock the fastener in place. This action locks the bolt and the set pin in place so you can rest assured that the bolt will not loosen due to Vibration heat or torque dependence.

Easy Removal
The Split Lock TM can be removed simply by loosening the set pin and backing out the fastener.

Use Them Time and Time Again
These fasteners are made of only the finest alloys allowing the same fastener to be used over and over while providing the same locking ability time and time again.

Be the first to review this product!

Price: $60.99

• Tell a Friend
• Write review / comment