| Image |
Name |
Price |
|
.JPG "Innovate LC-1 Standalone Wideband Controller") |
Innovate LC-1 Standalone Wideband Controller
The LC-1 includes the sensor, cable, deep bung with plug, wiring for ground/calibration and logworks software to record through a serial port.
You can check out the installation directions here.
The LC-1 Lambda cable is a complete wideband controller built in to a sealed cable. It features … |
$179.99
|
|
.JPG "28# Injectors") |
28# Injectors
These are used injectors that are rated at 24.7# @ 43.5 PSI, 28.5# @ 55psi, They are a drop in for the 2000 and newer 3100 and 3400 engines, or require different connectors for 1999 and older multec 1 style injectors. These connectors are available for cut/splice installation.
… |
$119.99
|
|
 |
36# L67 Injectors
Set of 6 used Bosch injectors that have been cleaned and tested for a proper spray pattern. Commonly called 36# injectors, these are measured at 352cc/min, or 33.5 # at 3 bar. These use the same connector as 1999 and older 60V6 motors. 2000+ multec 2 will need to change the connect… |
$129.99
|
|
.JPG "00+ Injector Connectors") |
00+ Injector Connectors
2000 and newer Multec 2 injector connectors (6) for injector swaps. These connectors are used but in excellent condition.
… |
$19.99
|
|
 (WinCE).jpg "ARP Header Studs") |
ARP Header Studs
Headers can represent a sizable investment, so you'll want to keep them securely attached. In addition, exhaust leaks can cost you power and even cause damage to your vehicle. ARP has the answer, in the form of their stainless steel header studs. They're made from premium 300 stainless steel… |
$109.99
|
|
.jpg "2.8/3.1/3100 MLS Head Gaskets") |
2.8/3.1/3100 MLS Head Gaskets
MLS head gaskets are comprised of three layers of stainless steel. The outer layers are an embossed viton coated stainless steel providing a superior seal with excellent rebound characteristics (reusable!) and are corrosive resistant. MLS head gaskets reduce bore distortion and withstand extrem… |
$199.99
|
|
 (WinCE).jpg "Comp 26915 Valve Springs") |
Comp 26915 Valve Springs
Set of 12 Comp 26915 Valve Springs
105 @ 1.800"
293 @ 1.200"
Coil Bind @ 1.100
313 lb/in spring rate
… |
$149.99
|
|
 |
Comp Cams 26986 Valve Springs
Set of 12 Comp 26986 Valve Springs
123 @ 1.750"
284 @ 1.175"
Coil Bind @ 1.060
280 lb/in spring rate
… |
$164.99
|
|
 |
Comp Cams Roller Tip Rockers 1.52:1
Stock gen 2 rockers are stamped steel 1.52:1 non roller anything rockers. As stamped steel goes, they may or may not really be 1.52:1. These comp roller tipped rockers are stronger and much more precise than stock and will keep the ratio as it was intended. 50 state legal. Th… |
$154.99
|
|
|
Comp Cams Roller Tip Rockers 1.6:1
Yes, its the same 1.52 picture...but trust me, if you order these you will get the 1.6:1 ratio rockers.
Stock gen 2 rockers are stamped steel 1.52:1 non roller anything rockers. As stamped steel goes, they may or may not really be 1.52:1. These comp roller tipped rockers are stronger an… |
$154.99
|
|
 |
2.8/3.1/3.4 RWD ARP Head Stud Kit
ARP head stud kit for all iron head 60V6 motors. |
$90.99
|
|
|
Comp Cams Flat Tappet Lifter Set
Set of 12 Comp Cams lifters for flat tappet motors.
These are not currently in stock, and take a few days to ship. |
$74.99
|
|
 (WinCE).jpg "Custom Length Pushrods") |
Custom Length Pushrods
Custom length pushrods are the correct length for our performance cams, and stiffer than the stock pushrod. While some have ran stock pushrods on reground and Comp camshafts, the proper preload on the hydraulic lifter is important for the best performance from the cam. The 60V6 is fortunat… |
$139.99
|
|
|
Forged Connecting Rods
Modified SCAT SBC connecting rods to drop right in any GM 60V6 engine with a 5.700" stock rod (2.8 to 3400). Narrow SBC connecting rod bearings have been sourced for these and are available for replacement. Price includes 1 set of bearings. Available in I o… |
$474.99
|
|
|
Performance Rod Bearings for Forged Rods
These Clevite H series bearings are meant for the Forged I and H beam connecting rods offered here on WOT-Tech. 60V6 bearing tangs will not line up properly with the SBC tangs used.
Clevite H-Series rod bearings were primarily developed for NASCAR racing, but are well su… |
$59.99
|
|
|
Performance Rod Bearings for 60V6 rods
These Clevite H-Series rod bearings are a drop in performance upgrade for stock 5.7" forged connecting rods found in the 2.8-3400 engines,
Clevite H-Series rod bearings were primarily developed for NASCAR racing, but are well suited to other types of competition engines. They're es… |
$119.99
|
|
 |
ARP Rod Bolts/nuts
ARP rod bolts/nuts designed for the 2.8 60V6 but will work with 2.8, 3.1, 3.4, 3100, 3400, and 3.4 DOHC rods. These make a great addition to any engine build up (though overkill for a bone stock rebuild). Here is the description as ARP puts it.
A premium grade 8740 alloy chrome moly ste… |
$59.99
|
|
 |
Main Stud Kit
Strengthen your bottom end with this high quality parts from ARP. Kit includes washers, studs, nuts, and ARP moly lube (not pictured). Long enough for use with a windage tray. Windage Tray holes will need to be opened up to fit the stud. You will need to have your mains line … |
$99.99
|
|
 |
Crank Scraper
Available for 2.8, 3.1, 3.4 displacement engines (DOHC, Iron Head, Aluminum Head). Please put your application in the additional comment field
Ishihara-Johnson crank scrapers are a very simple but effective way to improve the performance of your engine!
During normal engine operation a signi… |
$67.99
|
|
|
Teflon Crank Scraper
Available for 2.8, 3.1, 3.4 displacement engines (DOHC, Iron Head, Aluminum Head). Please put your application in the additional comment field
Made by the same company that makes our other crank scrapers, these are the best performing scraper option available. A rough cut piece of tef… |
$167.99
|
|
.JPG "Wide Cam Bearings") |
Wide Cam Bearings
These SBC cam bearings are a direct replacement, and will spread the load across the entire cam journal, unlike the stock bearings. Bi metal to support the roller cam profile and the load of higher spring pressure associated with performance cams. Regular SBC cam bearings are … |
$31.99
|
|
.JPG "Teflon Coated Wide Cam Bearings") |
Teflon Coated Wide Cam Bearings
These teflon coated SBC cam bearings are a direct replacement, and will spread the load across the entire cam journal, unlike the stock bearings. Bi metal to support the roller cam profile and the load of higher spring pressure associated with performance cams. Regular SBC&nbs… |
$64.99
|
|
.JPG "Tri Metal Rod Bearings") |
Tri Metal Rod Bearings
Tri Metal bearings offer increased strength for high output/high compression engines. Available in standard and .010" over for cranks that need to be turned. |
$29.99
|
|
.JPG "Tri Metal Main Bearings") |
Tri Metal Main Bearings
Tri Metal bearings offer increased strength for high output/high compression engines. Available in standard and .010" over for cranks that need to be ground. |
$54.99
|
|
.jpg "ARP Flywheel/Flex Plate Bolts") |
ARP Flywheel/Flex Plate Bolts
These premium-grade Pro series flywheel/ flexplate bolts from ARP are far superior to OEM hardware. These bolts are forged from aerospace alloy and heat-treated prior to thread rolling and machining. They feature an exclusive, flat 12-point head design and a larger-than-stock shank diameter fo… |
$37.99
|
|
|
ARP Torque Converter Bolts
ARP torque convert to flexplate bolts. Sold in sets of 3 |
$7.49
|
|
Your basket is empty.
