3400 Performance Package - Level 0

  • Click to enlarge
3400 Performance Package - Level 0

Tap to enlarge


Product Information

Each performance package is a starter kit of sorts to a finished engine.  With this kit, you get the stage 0 heads, stage 1 sportsman manifold set, a torque or street/strip cam depending on on your application, our best timing kit, and a quality full gasket set that we use for our race builds.  This kit is geared towards those who are rough on their engine, such as demolotion derby, and don't want to spend a lot of money on the engine, but don't want a stock engine either.  With the street/strip cam, its also a very solid upgrade for a daily driver.

The Stage 0 heads are equiped with reconditioned stock valves, Comp 26986 springs, new seats/seals.  The port work consists of a bowl blend, pocket porting, and mild deshrouding in the combustion chamber.  A custom 3 angle valve job is performed, as well as 2 angles on the valves.  Vacuum tested to ensure quality and consistency.  The deck surface is machined and ready for composite or MLS head gaskets.

Our Stage 1 Sportsman manifolds are modified to the port shapes we want, then blended into the stock runners.  For the upper, this means blending to the stock plenum area, and the lower is blended through the bend at the top, and into the injector boss area at the bottom. 

The Torque cam is exactly what the name implies, a ton of bottom end torque.  It is also less lift and duration than our other cams and will help the engine live in rough conditions.  Power is back to stock cam levels after 5000 RPM, so the tradeoff isn't much for what is gained down low.  

Street/Strip is the perfect cam for the street.  Idle is great, power is great, MPG is great.  If you want power on the highway, or want to go to the dragstrip, this is the better option.   

Performance Pushrods are custom length based on the cam and machine work done to the heads and block.  They are also a thicker wall, which reduces deflection (more accurate valve timing).  

Performance Timing Set.  We only use a race proven OEM chain for the 94-99 engines with cloyes gears that are cryo teated, and then micropolished.  These extra steps are taken to improve durability and reduce friction.  Combined with the tensioner used on newer engines and you have something that will stay in time longer.


Stage 0 Heads

Please choose your rocker arm stud size, 10mm or 8mm.  2003+ (some 02) are 8mm.  We offer Time Sert upgrades for both 8 and 10mm, though 8mm is recommended, or converting your 8mm to 10mm is also a common request.  If you have 10mm studs already, then you are not likely to benefit from this service. 

CBX Thermal Coating for combustion chamber and valve faces.  Great for motorsports applications, this coating will help keep the heat in the exhaust rather than being absorbed into the piston and cylinder head.


Please select the Torque or Street/Strip camshaft


Any questions, please use the store contact form or call 574-968-7607

Product CodeWOTLA1PP0

Customer Reviews

This product hasn't been reviewed yet.

Write a review

Write Review

Please enter a valid email address.
This field is required.

Follow Us

Mailing List

Enter your e-mail address to receive our newsletter
Please enter a valid email address.
Email address already subscribed. Continue if you wish to unsubscribe.

eCommerce by CubeCart