3400 Performance Package - Level 2

  • Click to enlarge
3400 Performance Package - Level 2

Tap to enlarge


Product Information

Each performance package is a starter kit of sorts to a finished engine.  With this kit, you get the stage 2 heads, stage 2 competition manifold set, a strip cam  our best timing kit, and a quality full gasket set that we use for our race builds.  This kit is geared towards those who are rough on their engine, such as demolotion derby, and don't want to spend a lot of money on the engine, but don't want a stock engine either.  With the street/strip cam, its also a very solid upgrade for a daily driver.

The Stage 2 heads are equiped with a set of stainless valves featuring a larger intake valve (1.8 vs 1.76) for improved flow, reconditioned valve guides with bronze liners and sized to spec with the new valves, Comp 26915 springs, LS style seats and seals.  The port work consists of a port matching, reshaping, polishing, and blending to give the best flow along with a full deshrouded combustion chamber.

  A custom 5 angle valve job is performed, as well as 2 angles on the valves.  Vacuum tested to ensure quality and consistency.  The deck surface is machined and ready for composite or MLS head gaskets.

Our Stage 2 Competition manifolds uses the larger 3500 upper intake gaskets and are fully ported and the bell shape inside to the plenum is perfectly shaped to match.  The lower intake is ported from end to end as well as the lower portion modified with our previously researched improvements.  

The Strip cam is excellent for street use and track use.  Idle can be smooth, or slightly lopey depending on the tune and idle RPM.  Power compared to a stock cam is slightly less down low, with mid and top end power being greatly improved.  6500 RPM is no problem with this cam

Performance Pushrods are custom length based on the cam and machine work done to the heads and block.  They are also a thicker wall, which reduces deflection (more accurate valve timing).  

Performance Timing Set.  We only use a race proven OEM chain for the 94-99 engines with cloyes gears that are cryo teated, and then micropolished.  These extra steps are taken to improve durability and reduce friction.  Combined with the tensioner used on newer engines and you have something that will stay in time longer.


Stage 2 Heads

Please choose your rocker arm stud size, 10mm or 8mm.  2003+ (some 02) are 8mm.  We offer Time Sert upgrades for both 8 and 10mm, though 8mm is recommended, or converting your 8mm to 10mm is also a common request.  If you have 10mm studs already, then you are not likely to benefit from this service. 

CBX Thermal Coating for combustion chamber and valve faces.  Great for motorsports applications, this coating will help keep the heat in the exhaust rather than being absorbed into the piston and cylinder head.


Any questions, please use the store contact form or call 574-968-7607

Product CodeWOTLA1PP2

Customer Reviews

This product hasn't been reviewed yet.

Write a review

Write Review

Please enter a valid email address.
This field is required.

Follow Us

Mailing List

Enter your e-mail address to receive our newsletter
Please enter a valid email address.
Email address already subscribed. Continue if you wish to unsubscribe.

eCommerce by CubeCart