Comp Cams 260 Cam Kit

Comp Cams 260 Cam Kit
  • Click to enlarge

$339.99


Product Information
Specification

This is the most complete cam kit available from Comp, and works great for anyone looking for an upgraded cam for their 1980-1993 2.8/3.1/3.4 engine.  Will work with the stock computer on fuel injected engines.  Not for 1987 and newer FWD vehicles (Iron head only for this entire kit to work).

Cam Style   Hydraulic flat tappet
Basic Operating RPM Range   1,000-5,000
Intake Duration at 050 inch Lift   212
Exhaust Duration at 050 inch Lift   212
Duration at 050 inch Lift   212 int./212 exh.
Advertised Intake Duration   260
Advertised Exhaust Duration   260
Advertised Duration   260 int./260 exh.
Intake Valve Lift with Factory Rocker Arm Ratio   0.440 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio   0.440 in.
Valve Lift with Factory Rocker Arm Ratio   0.440 int./0.440 exh.
Lobe Separation (degrees)   110
Grind Number   CSV-6 260H-10
Computer-Controlled Compatible   No
Lifters Included   Yes
Lifter Style   Hydraulic flat tappet
Valve Springs Included   Yes
Outside Diameter of Outer Spring (in)   1.230 in.
Retainers Included   Yes
Locks Included   Yes
Valve Stem Seals Included   Yes
Timing Chain and Gears Included   Yes
Timing Chain Style   Double non-roller
Assembly Lubricant Included   Yes
Pushrods Included   No
Rocker Arms Included   No
Gaskets Included   No
Valve Springs Required   No
Quantity   Sold as a kit.
Product Code K16-233-4
Manufacturer Comp Cams
Condition New
Weight 10Lb

Top