3.4/3x00 Hybrid SS High Comp Cam Kit

Designed for the iron head Gen 1 60V6 engines that are now running the Gen 3 heads, lower intake and the stock 3.4 pistons.  This cam package will give you the best performance with a stock idle quality.  2000-6000 RPM range High Compression Street Strip cam using the more aggressive XFI lob…

Comp Cams 260 Cam Kit

This is the most complete cam kit available from Comp, and works great for anyone looking for an upgraded cam for their 1980-1993 2.8/3.1/3.4 engine.  Will work with the stock computer on fuel injected engines.  Not for 1987 and newer FWD vehicles (Iron head only for this entire kit to work). …

Custom Length Pushrods

Custom length pushrods will give you the most from your camshaft upgrade due to the optimal preload on the lifter, and the thicker .083" wall thickness.  Made from heat treated 4130 chromoly steel coupled with heat treated pushrod ends, and good for up to 700 pounds open valve spring pressure. Whe…

Adjustable Pushrod

5.700-6.250" range adjustable pushrod to determine the correct pushrod lengths for optimal preload. 

Pushrod Length Checker for Flat Tappet Cams

Comp Cams adjustable pushrod for the flat tappet engines using pushrods longer than 6.200" length.  Each revolution is .050" and is marked for easy measurement without a caliper.

ARP M8 x 1.25 Thread Chaser

A thread chaser will clean out threaded holes without removing material.  We use these on our blocks and heads before assembly to create the ideal clamping force from consistent torque measurements. 

ARP M10 x 1.50 Thread Chaser

A thread chaser will clean out threaded holes without removing material.  We use these on our blocks and heads before assembly to create the ideal clamping force from consistent torque measurements.