Nut and Bolt Sheet for 3400 V6

  • Click to enlarge
Nut and Bolt Sheet for 3400 V6

Tap to enlarge

$0.00


Product Information
Specification
WOT-Tech Nut and Bolt Sheet for GM 3400 V6
3400 Bolt and Nut IndexBoltQTYStudQTYNutQTYNotes
        
Throttle Body BracketM6x 1.0 x 102  M6 x 1.01 
Throttle Body BoltsM8 x 1.25 x 451M8 x 1.25 x 651M8 x 1.252 
Throttle Position SensorT20 M4 x 0.7 x 152     
Idle Air ControllerT20 M4 x 0.7 x 152     
Throttle PlateT15 M3.5 x 0.6 x 102     
EGR Tube to EGRM8 x 1.25 x 201     
EGR Exhaust Tube NutM22 x 1.751    Size for Plug
EGR to Intake ManifoldM8 x 1.25 x 352     
Charcoal Cannister PurgeM6 x 1.0 x 201     
Manifold Air Pressure Bracket40mm Long Sheet Metal Screw1     
Upper to Lower IntakeM8 x 1.25 x 355M8 x 1.25 x 601M8 x 1.251 
Fuel RailM6 x 1.0 x 152     
Fuel Pressure RegulatorT30 M6 x 1.0 x 151     
Fuel Line to Rear Head Bracket    M6 x 1.01 
Coolant Heater to Water PumpM6 x 1.0 x 201     
Exhaust Manifold Shield BoltsM6 x 10 x 1011     
Exhaust Manifold to Head  M8 x 1.25 x 5012M8 x 1.2512 
Thermostat Housing BoltsM8 x 1.25 x 252     
Heater Return Bracket to Rear Head    M8 x 1.251 
Engine Lift Mount to HeadM10 x 1.5 x 254     
Rear Head Special Nut/StudM10 x 1.5 x 15 Bottom2  18mm Bases for heater return and fuel line hold down
 M8 x 1.25 x 15 Top      
Idler PulleyM10 x 1.5 x 302    Bushings used between bolt and pulley
Tensioner BoltM10 x 1.5 x 751     
Tensioner Pulley BoltM8 x 1.25 x 201     
Engine Mount Bracket BoltsM10 x 1.5 x 453     
Bracket to Timing Cover BoltsM10 x 1.5 x 701     
 M10 x 1.5 x 751     
 M8 x 1.25 x 652     
Accessory Belt Cover/DiagramM6 x 1.0 x 201     
Waterpump PulleyM8 x 1.25 x 104     
Waterpump to Timing CoverM6 x 1.0 x 155     
Crank PulleyM12 x 1.5 x 451    Big Washer Needed
Alternator BracketM10 x 1.5 x 451     
 M10 x 1.5 x 351     
 M10 x 1.5 x 751     
Valve CoverM6 x 1.0 x 308     
Lower IntakeM8 x 1.25 x 354     
 M8 x 1.25 x 1004     
Cam Position SensorM6 x 1.0 x 101     
Oil Pump Drive Hold DownM10 x 1.5 x 351     
Dip Stick Hold DownM10 x 1.5 x 251     
Crank Position Sensor  M6 x 1.0 x 351M6 x 1.02 
Drain PlugPipe Thread ¼?2     
Bolt for knock sensor wire holderM10 x 1.5 x 201     
Oil Pan Side BoltsM10 x 1.5 x 256     
Oil PanM8 x 1.25 x 2511M8 x 1.25 x 251  Stud is special with M6 x 1.0 x 15 on top of nut
Oil Pump BoltM10 x 1.5 x 501     
24x SensorM6 x 1.0 x 152     
24x BracketM8 x 1.25 x 351     
 M12 x 1.75 x 201     
Timing CoverM8 x 1.25 x 352     
 M10 x 1.5 x 401     
 M12 x 1.75 x 402     
Chain DampenerM8 x 1.25 x 252     
Cam PlateM6 x 1.0 x 102     

 

Product CodeArticle3400NutBolt
ConditionNew

This field is required.
Top

Follow Us

Mailing List

Enter your e-mail address to receive our newsletter
Please enter a valid email address.
Email address already subscribed. Continue if you wish to unsubscribe.
Subscribe
Unsubscribe

eCommerce by CubeCart