60V6

60V6

Complete list of every GM 60V6 product sold on WOT-Tech.

  • External Crank Trigger

    Used mainly for swapping the LX9 3.5l V6 engine into vehicles using a computer for the more common 7x sensor setup used in all MPFI/SFI 60V6 2.8-3.4l engines.  Includes everything pictured, plus washers to adjust for spacing from the block to the timing wheel. …

    $149.99

  • HPTuners VCM Suite

    HPTuner's VCM Suite will allow you to tune your OBD2 equipped vehicle, given that it is on the list of supported vehicles.  If you are not familiar with their setup, please check their site at http://www.hptuners.com/ There are 2 versions of the suite, Regular, and Pro.  With th…

    $499.99

  • HPTuner Credits

    Credits are used to upgrade/add capabilities to your HPTuner's VCM Suite.  For more information, please check the HPTuner's Credit FAQ. …

    $49.99

  • 56mm Throttle Body

    The stock 3100 Throttle body is 52mm.  Stock 3400 s 56mm.  While this seems like a small difference, it will equal a very noticable difference once installed on a 3100 engine.  Sold as a bare throttle body with plate, so you will need to swap your stock sensors to the new throttle …

    $64.99

  • LX5 65mm Throttle Body

    This is a stock LX5 3.5l V6 Throttle body, which has a 65mm bore.  Can be used on the 3100, 3400, and 3500 upper intake with the WOT-Tech LX5 TB Adapter. 

    $99.99

  • Cable Bracket for LX5 TB

    This modified bracket has been tested on W body and N body 3100/3400 engines, and will bolt right up to the upper intake and the front of the throttle body.  Stock cables work but the W body needed the cable body attachment points moved 1/4" to let the bracket reach. FIts 3100/3400 uppe…

    $24.99

  • LX5 65mm TB Adapter

    We have designed an adapter to use the 65mm TB found on the Oldsmobile 3.5 DOHC. Bolting it to the manifold (3100, 3400 or 3500, both bolt patterns and sets of bolts are included) is no problem, but attaching the throttle cable bracket will be a DIY project.  You will need both gaskets Y…

    $54.99

  • Stage 1 3100 Upper Intake Porting Service

    Our Stage 1 Porting Service includes Clean, bake, blast, and inspect for cracks/warpage Gasket match and blend 65mm Throttle Body opening (Optional at no additional charge) We also offer a welding service to repair cracked manifolds. Please inquire for pricing.  …

    $99.99

  • Stage 2 3100 Upper Intake Porting Service

    Our Stage 2  Porting Service includes Clean, bake, blast, and inspect for cracks/warpage Gasket match Full Port on runners, blend to plenum area. 65mm Throttle Body opening (Optional at no additional charge) We also offer a welding service to repair cracked m…

    $149.99

  • Stage 1 3400 Upper Intake Porting Service

    Our Stage 1 Porting Service includes Clean, bake, blast, and inspect for cracks/warpage Gasket match and blend 65mm Throttle Body opening (Optional at no additional charge) We also offer a welding service to repair cracked manifolds. Please inquire for pricing.  …

    $99.99

  • Stage 2 3400 Upper Intake Porting Service

    Our Stage 2  Porting Service includes Clean, bake, blast, and inspect for cracks/warpage Gasket match Full Port on runners, blend to plenum area. 65mm Throttle Body opening (Optional at no additional charge) We also offer a welding service to repair cracked m…

    $149.99

  • Stage 1 3100/3400 Lower Intake

    Each lower intake is cleaned, baked, blasted, and inspected for cracks and warpage.   Stage 1 porting used gasket matched/flow optimized ports with a reshaped lower section for the best performnace when using stock or Stage 1 and 2 WOT-Tech performance heads.     …

    $124.99

More
Loading
Top

eCommerce by CubeCart